Home Catalog Suspension, arms Arms and arm sets
Arms and arm sets
1275 Products found
  • 7700873
    SKCA-0050080
    STARK, Arms and arm sets
    Fitting Position: both sides; Fitting Position: Upper; Fitting Position: Front Axle; Length 1/Length 2 [mm]: 229; Width [mm]: 289; Thread Size: M12x1.5; Cone Size [mm]: 16,7; Control/Trailing Arm Type: Control Arm; Suspension material: Aluminium;
  • 7700874
    SKCA-0050046
    STARK, Arms and arm sets
    Fitting Position: Front; Fitting Position: Front Axle Right; Length [mm]: 284; Width [mm]: 349; Material: Steel; Control/Trailing Arm Type: Control Arm; Fastening Type: Four-point attachment; Left-/right-hand drive vehicles: for left-hand/right-hand drive vehicles; Supplementary Article / Supplementary Info: with accessories;
  • 7700875
    SKCA-0050038
    STARK, Arms and arm sets
    Fitting Position: Upper; Fitting Position: Front Axle Left; Cone Pitch: 1:5; Length [cm]: 345,5; Cone Size [mm]: 16,5; Material: Aluminium; Control/Trailing Arm Type: Trailing Arm; Supplementary Article / Supplementary Info Info 2: with rubber mount;
  • 7700876
    SKCA-0050034
    STARK, Arms and arm sets
    Fitting Position: Front Axle Right; Cone Pitch: 1:5; Length [mm]: 343,5; Width [mm]: 80; Cone Size [mm]: 16,5; Material: Aluminium; Control/Trailing Arm Type: Control Arm; Supplementary Article / Supplementary Info Info 2: with ball joints; Supplementary Article / Supplementary Info Info 2: with nut;
  • 7700877
    SKCA-0050041
    STARK, Arms and arm sets
    Fitting Position: Front Axle Right; Cone Pitch: 1:10; Length [mm]: 385; Cone Size [mm]: 17; Material: Aluminium; Control/Trailing Arm Type: Control Arm; Supplementary Article / Supplementary Info Info 2: with nut;
  • 7700878
    SKCA-0050047
    STARK, Arms and arm sets
    Vehicle configuration line / variant: 12,2; Vehicle configuration line / variant: 14,5; Fitting Position: Front Axle Right; Cone Size [mm]: 15; Material: Steel; Control/Trailing Arm Type: Control Arm; Rod/Strut: Push Rod;
  • 7700879
    SKCA-0050050
    STARK, Arms and arm sets
    Fitting Position: Front Axle Left; Fitting Position: Lower Front Axle; Length 1/Length 2 [mm]: 312; Width [mm]: 290; Required quantity: 1; Cone Size [mm]: 15; Control/Trailing Arm Type: Control Arm; Rod/Strut: Push Rod; Supplementary Article / Supplementary Info Info 2: with ball joint; Supplementary Article / Supplementary Info Info 2: with rubber mount;
  • 7700880
    SKCA-0050057
    STARK, Arms and arm sets
    Fitting Position: Front Axle Left; Bore Diameter [mm]: 57,9; Required quantity: 1; Required quantity: 1,0; Cone Size [mm]: 16,40; Material: Cast Steel; Control/Trailing Arm Type: Control Arm; Control/Trailing Arm Type: Trailing Arm; Supplementary Article / Supplementary Info Info 2: with ball joint; Supplementary Article / Supplementary Info Info 2: with rubber mount; External Thread 2 [mm]: M14x1,5;
  • 7700886
    SKCA-0050054
    STARK, Arms and arm sets
    Fitting Position: Front Axle Right; Cone Pitch: 1/10; Length [mm]: 387; Thread Size: M14x1,5; Cone Size [mm]: 16,5; Material: Steel; Control/Trailing Arm Type: Control Arm; Rod/Strut: Pressure Rod; Supplementary Article / Supplementary Info Info 2: with rubber mount;
  • 7700887
    SKCA-0050063
    STARK, Arms and arm sets
    Fitting Position: Front Axle Right; Length [mm]: 470; Width [mm]: 78; Height: 95; Material: Cast Steel; Control/Trailing Arm Type: Control Arm; Supplementary Article / Supplementary Info Info 2: with rubber mount; Thread Size 1: M14x1.5;
  • 7700888
    SKCA-0050055
    STARK, Arms and arm sets
    Fitting Position: Left; Fitting Position: Front Axle; Cone Pitch: 1/8; Cone Size [mm]: 16,7; External Thread [mm]: M14X1,5; Material: Cast Steel; Control/Trailing Arm Type: Control Arm; Rod/Strut: Pull Rod; Length 1 [mm]: 401;
  • 7700889
    SKCA-0050059
    STARK, Arms and arm sets
    Fitting Position: Front; Fitting Position: Front Axle Right; Cone Pitch: 1:8; Length [mm]: 453; Thread Size: M16x1.5; Cone Size [mm]: 19,6; Material: Cast Steel; Control/Trailing Arm Type: Trailing Arm; Supplementary Article / Supplementary Info Info 2: with ball joint;
  • 7700890
    SKCA-0050061
    STARK, Arms and arm sets
    Fitting Position: Left Rear; Fitting Position: Lower Front Axle; Cone Pitch: 1:8; Length [mm]: 453; Cone Size [mm]: 19,5; Material: Steel; Control/Trailing Arm Type: Control Arm; Supplementary Article / Supplementary Info Info 2: with ball joint; Supplementary Article / Supplementary Info Info 2: with rubber mount; Thread Size 1: M16 x 1,5;
  • 7700891
    SKCA-0050072
    STARK, Arms and arm sets
    Fitting Position: Left; Fitting Position: Front; Fitting Position: Front Axle; Length [mm]: 401; Thread Size: M14x1.5; Cone Size [mm]: 16,2; Material: Aluminium; Control/Trailing Arm Type: Control Arm; Supplementary Article / Supplementary Info Info 2: with nut;
  • 7700892
    SKCA-0050073
    STARK, Arms and arm sets
    Fitting Position: Right; Fitting Position: Front; Fitting Position: Front Axle; Length [mm]: 401; Cone Size [mm]: 16,2; Control/Trailing Arm Type: Control Arm; Supplementary Article / Supplementary Info Info 2: with nut; Thread Size 1: M14X1,5; Suspension material: Aluminium;
  • 7700893
    SKCA-0050078
    STARK, Arms and arm sets
    Fitting Position: Front Axle Left; Length [mm]: 295,6; Diameter 1 [mm]: 13,8; Diameter 2 [mm]: 13,5; Material: Aluminium; Control/Trailing Arm Type: Control Arm; Thread Size 1: M12x1,175;
  • 7700894
    SKCA-0050079
    STARK, Arms and arm sets
    Fitting Position: Front Axle Right; Cone Pitch: 1/6; Cone Size [mm]: 14,5; Control/Trailing Arm Type: Control Arm; Suspension material: Steel;
  • 7700895
    SKCA-0050082
    STARK, Arms and arm sets
    Fitting Position: Right; Fitting Position: Lower; Fitting Position: Front Axle; Length [mm]: 277; Cone Size [mm]: 13,8; Material: Aluminium; Control/Trailing Arm Type: Control Arm;
  • 7700896
    SKCA-0050084
    STARK, Arms and arm sets
    Fitting Position: Left; Fitting Position: Lower; Fitting Position: Front Axle; Length [mm]: 277; Width [mm]: 257; Cone Size [mm]: 13,8; Material: Aluminium; Control/Trailing Arm Type: Control Arm;
  • 7700897
    SKCA-0050085
    STARK, Arms and arm sets
    Fitting Position: Front Axle Left; Length [mm]: 435; Thread Size: Without Ball Joint; Material: Cast Steel; Control/Trailing Arm Type: Control Arm;
Stark Professional Line suspension arms: reliability and quality

Using the components from German company Stark Professional Line you can guarantee your safety on the road and increase performance of your vehicle. We manufacture suspension arms that fully comply with original spare parts components. Every our component successfully copes with the following tasks:

  • ensuring the necessary level of vehicle smoothness;
  • reducing fuel consumption due to reduced weight of the component;
  • resistance to temperature conditions and, consequently, reliable operation under all conditions.

Advantages of Stark Professional Line suspension arms

Product range. Transverse, diagonal, longitudinal, A-shaped, H-shaped — you’ll find every component you need in the Stark Professional Line catalog.

Innovation. The features of our production allowed us to reduce the weight and to optimize the shape of the suspension arms. Changing these parameters helps improve vehicle performance and reduce fuel consumption.

Material. For manufacturing Stark Professional Line suspension arms, we use sheet steel, aluminum and cast iron. These materials allow reaching optimal weight of the components and ensure their durability.

Quality control of Stark Professional Line suspension arms

Testing of Stark Professional Line suspension arms includes:

  • measuring noise and vibration of the suspension element on a moving vehicle;
  • material strength testing and testing its resistance to deformation;
  • road tests;
  • checking resistance to external factors and to the fluids used in systems of the vehicle.
English